23 June 2011

The Indonesia Kamikaze fishing club picture

A fishing heaven

Can you believed

Many teams event

Huge fish

Tired of counting fish

No comments:

What is REEL (from the Wikipedia)

Fishing reel

A fishing reel is a device used for the deployment and retrieval of a fishing line using a spool mounted on an axle. Fishing reels are traditionally used in the recreational sport of angling. They are most often used in conjunction with a fishing rod, though some specialized reels are mounted directly to boat gunwales or transoms. The earliest known illustration of a fishing reel is from Chinese paintings and records beginning about 1195 AD. Fishing reels first appeared in England around 1650 AD, and by the 1760s, London tackle shops were advertising multiplying or gear-retrieved reels. Paris, Kentucky native George Snyder is generally given credit for inventing the first fishing reel in America around 1820, a bait casting design that quickly became popular with American anglers.

Types of fishing reels

Centrepin Reel

Mainly used for fly fishing. The fly reel or fly casting reel has traditionally been rather simple in terms of mechanical construction, little has changed from the design patented by Charles F. Orvis in 1874.^[6] However, in recent years improvements have been made with the development of better reels and drags for fighting larger fish. A fly reel is normally operated by stripping line off the reel with one hand, while casting the rod with the other hand. Early fly reels often had no drag at all, but merely a click/pawl mechanism intended to keep the reel from overrunning when line was pulled from the spool. To slow a fish, the angler simply applied hand pressure to the rim of the revolving spool (known as "palming the rim"). Later, these click/pawl mechanisms were modified to provide a limited adjustable drag. Although adequate for smaller fish, these did not possess a wide adjustment range or the power to slow larger fish.

Modern fly reels typically have more sophisticated disc-type drag systems made of composite materials that feature increased adjustment range, consistency, and resistance to high temperatures from drag friction. Most of these fly reels also feature large-arbor spools designed to reduce line memory, maintain consistent drag and assist the quick retrieval of slack line in the event a hooked fish makes a sudden run towards the angler.

At one time, multiplier fly reels were widely available. These reels had a geared line retrieve of 2:1 or 3:1 that allowed faster retrieval of the fly line. However, their additional weight, complexity and expense did not justify the advantage of faster line retrieval in the eyes of many anglers. As a result, today they are rarely used.

Automatic fly reels use a coiled spring mechanism that pulls the line into the reel with the flick of a lever. Automatic reels tend to be heavy for their size, and have limited line capacity. Automatic fly reels peaked in popularity during the 1960s, and since that time they have been outsold many times over by manual fly reels.

Saltwater fly reels are designed specifically for use in an ocean environment. Saltwater fly reels are normally much larger in diameter than most freshwater fly reels in order to provide a large line and backing capacity designed for the long runs of powerful ocean game fish. To prevent corrosion, saltwater fly reels often use aerospace aluminum frames and spools, electroplated and/or stainless steel components, with sealed and waterproof bearing and drive mechanisms.

Fly Reel Operation

Fly reels are normally manual, single-action designs. Rotating a handle on the side of the reel rotates the spool which retrieves the line, usually at a 1:1 ratio (i.e., one complete revolution of the handle equals one revolution of the spool).

The centrepin reel is also used for coarse fishing, where one can use it to trot on a fast flowing river. Normally, the float would be pulled under because of the fast current, but the centrepin reel automatically releases line, thus making the float not go under.

Other Centerpin Reels

Centerpin reels remain popular with anglers in Australia for all forms of fresh and saltwater fishing. Most common is the use of centerpin reels in Australia for surfcasting off the beach. A large diameter spool centerpin reel is attached in a low mount position on a 12–17 foot surfcasting pole by way of a bracket that allows the reel to be rotated 90° to the pole for casting and returned to a position to retrieve line. In the casting position the spool is perpendicular to the pole, opening the face of the reel allowing the line to run off the side of the spool when released in the cast. The surfcasting poles are specifically designed for use with these reels have the reel low mounted as the line is held and released during the cast by the lower hand on the rod, unlike fixed spool or multiplier surf reels, and the lowest ring is of large diameter and around halfway along the poles length.

Bait casting reel

Bait casting reels are reels in which line is stored on a bearing supported revolving spool. The bait casting reel is mounted above the rod, hence its other (though rarely used) name, the overhead reel. The bait casting reel dates from at least the mid-17th century, but came into wide use by amateur anglers during the 1870s. Early bait casting reels were often constructed with brass or iron gears, with casings and spools made of brass, German silver, or hard rubber. Early reels were often operated by inverting the reel and using back winding to retrieve line. For this reason, the reel crank handle was positioned on the right side of the reel.^[6] As a result, the right-hand crank position for bait casting reels has become customary over the years, though models with left-hand retrieve are now gaining in popularity. Many of today's bait casting reels are constructed using aluminum, stainless steel, and/or synthetic composite materials. They typically include a level-wind mechanism to prevent the line from being trapped under itself on the spool during rewind and interfering with subsequent casts. Many are also fitted with anti-reverse handles and drags designed to slow runs by large and powerful game fish. Because the momentum of the forward cast must rotate the spool as well as propel the fishing lure, bait casting designs normally require heavier lures (>1/4 oz.) for proper operation than with other types of reels. The gear ratio in bait casting reels was initially about 3/1, later standardized at 4/1 in most reels, but recent developments have seen many bait casting reels with gear ratios as high as 5.5/1 or even 7.1/1. Higher gear ratios allow much faster retrieval of line, but sacrifice some amount of power in exchange.

Spool tension on most modern bait casting reels can be adjusted with adjustable spool tension, a centrifugal brake, or a magnetic "cast control." This reduces spool overrun during a cast and the resultant line snare, known as backlash, colloquially called a "bird's nest". Each time a lure of a different weight is attached, the cast control must be adjusted for the difference in weight. The bait casting reel design will operate well with a wide variety of fishing lines, ranging from braided multifilament and heat-fused "superlines" to copolymer, fluorocarbon, and nylon monofilaments (see Fishing line). Most bait casting reels can also easily be palmed or thumbed to increase the drag, set the hook, or to accurately halt the lure at a given point in the cast.

A variation of the bait casting reel is the big game reel. These are very large and robust fishing reels, designed and built for heavy saltwater species such as tuna, marlin, sailfish and sharks. Big game reels are not designed for casting, but used for trolling or fishing set baits and lures on the open ocean.

Bait casting reels are sometimes referred to as conventional reels in the U.S. They are known as multiplier reels in Europe, on account of their geared line retrieve (one turn of the handle resulting in multiple turns of the spool).

Bait Casting Reel Operation

A bait casting reel and rod is cast by moving the rod backward, then snapping it forward. The rod is held with the handles of the reel facing upward. During the forward cast, the weight of the lure pulls the line off the reel. The thumb is used to halt the lure at the desired location and to prevent spool overrun. Though modern centrifigal braking systems help to control backlash, using a bait casting reel still requires practice, and a certain amount of finesse on the part of the fisherman for best results.

Spinning (fixed spool) reel

Reels utilizing a fixed spool were in use in North America as early as the 1870s. They were originally developed to allow the use of artificial flies, or other lures for trout or salmon, that were too light in weight to be easily cast by bait casting reels. Fixed spooled reels are normally mounted below the rod. Spinning reels also solved the problem of backlash, as they did not have a rotating spool to overrun and foul the line. The earliest fixed-spool reels turned the spool 90 degrees in the body of the reel for retrieval, and then reversed it back into casting position. In casting position, line was drawn off in coils from the end of the fixed, non-rotating spool.

In 1948, the Mitchell Reel Company of Cluses, France introduced the Mitchell 300 with a design that oriented the face of the spool forward in a permanently fixed position below the fishing rod. A mechanical line pickup was used to retrieve the cast line (eventually developed into a wire bail design), and an anti-reverse lever prevented the crank handle from rotating while a fish was pulling line from the spool. Because the line did not have to pull against a rotating spool, much lighter lures could be cast than with a bait casting reel. Conversely, halting the cast and stopping the lure at the desired position requires practice in learning to feather the line with the forefinger as it uncoils from the spool. Most spinning reels operate best with fairly limp, flexible fishing lines.

Though spinning reels do not suffer from backlash, the line can be trapped underneath itself on the spool or even detach from the reel in loose loops of line. Various oscillating spool mechanisms have been introduced over the years in an effort to solve this problem. Spinning reels also tend to have more issues with twisting of the fishing line. Line twist in spinning reels can occur from the spin of an attached lure, the action of the wire bail against the line when engaged by the crank handle, or even retrieval of line that is under load (spinning reel users normally pump the rod up and down, then retrieve the slack line to avoid line twist and stress on internal components). Most anglers who use a spinning reel also manually reposition the bail after each cast in order to minimize line twist.

Fixed Spool Reel Operation

Fixed spool reels are cast by opening the bail, grasping the line with the forefinger, and then using a backward snap of the rod followed by a forward cast while releasing the line with the forefinger at the same time. On the retrieve, the large rotating wire cage or bail (either manually or trigger-operated) serves as the line pickup, restoring the line to its original position on the spool.

Spin cast reel

The first commercial spin cast reels were introduced by the Denison-Johnson Reel Company and the Zero Hour Bomb company in 1949. The spin cast reel is an attempt to solve the problem of backlash found in bait cast designs, while reducing line twist and snare complaints sometimes encountered with traditional spinning reel designs. Just as with the spinning reel, the line is thrown from a fixed spool and can therefore be used with relatively light lures and baits. However, the spin cast reel eliminates the large wire bail and line roller of the spinning reel in favor of one or two simple pickup pins and a metal cup to wind the line on the spool. Traditionally mounted above the rod, the spin cast reel is also fitted with an external nose cone that encloses and protects the fixed spool.

With a fixed spool, spin cast reels can cast lighter lures than bait cast reels, although friction of the nose cone against the unspooling line slightly reduces casting distance compared to spinning reels. Spin cast reels also generally have narrow spools with less line capacity than either bait casting or spinning reels of equivalent size. However, this tends to reduce line snare issues. Like other types of reels, spin cast reels are frequently fitted with both anti-reverse mechanisms and friction drags, and some also have level-wind (oscillating spool) mechanisms. Most spin cast reels operate best with limp monofilament lines, though at least one spin cast reel manufacturer installs a thermally fused "superline" into one of its models as standard equipment. During the 1950s and into the mid-1960s, they were widely used and very popular, though the spinning reel has since eclipsed them in popularity in North America. They remain a favorite fishing tool for beginners.

Spin Cast Reel Operation

Pressing a button on the rear of the reel disengages the line pickup, and the button is then released during the forward cast to allow the line to fly off the spool. The button is pressed again to stop the lure at the position desired. Upon cranking the handle, the pickup pin immediately re-engages the line and spools it onto the reel.

Underspin reel

Underspin or Triggerspin reels are spin cast reels in which the reel is mounted underneath a standard spinning rod. With the reel's weight suspended beneath the rod, underspin reels are generally more comfortable to cast and hold for long periods, and the ability to use all standard spinning rods greatly increases its versatility compared to traditional spin cast reels.

Underspin Reel Operation

A lever or trigger is grasped or rotated (usually by the forefinger) and this action suspends the line in place. During the forward cast, the lever/trigger is released, and the line flies off the fixed spool. When necessary, the lever can be activated once again to stop the lure at a given point in the cast.

Reel Mechanisms

Direct-drive reel

Direct-drive reels have the spool and handle directly coupled. When the handle moves forwards, the spool moves forwards, and vice-versa. With a fast-running fish, this may have consequences for the angler's knuckles. Traditional fly reels are direct-drive.

Anti-reverse reel

In anti-reverse reels, a mechanism allows line to pay out while the handle remains stationary. Depending on the drag setting, line may also pay out, as with a running fish, while the angler reels in. Bait casting reels and many modern saltwater fly reels are examples of this design. The mechanism works either with a 'dog' or 'pawl' design that engages into a cog wheel attached to the handle shaft. The latest design is Instant Anti-Reverse, or IAR. This system incorporates a one-way clutch bearing on the handle shaft to restrict handle movement to forward motion only.

Drag Mechanisms

Drag is a mechanical means of applying variable pressure to the turning spool in order to act as a friction brake against it. It can be as simple as a flat spring pressing against the edge of the spool, or as sophisticated as a complicated arrangement of leather and Teflon discs. Properly set drag allows larger and more powerful fish to be safely brought to boat and landed, as the drag will "slip" below the breaking point of the line, but in combination with the angle of the rod, it puts relentless pressure on the fish, quickly tiring it. As a rough general rule, drag is nominally set at about one-half of the line's breaking strength. It can be adjusted up or down as needed by the fisherman while playing a fish, though it takes practice to do this without adding too much drag which frequently results in a broken line and a lost fish. With skillful use of the rod and drag mechanism, fish of greater weight than the line's breaking strength can be successfully played and landed, which gives the fish the most sporting chance, and the fisherman the greatest satisfaction in his skills properly applied.

What is Rod?

A fishing rod or a fishing pole is a tool used to catch fish, usually in conjunction with the pastime of angling, and can also be used in competition casting. (Sustenance and commercial fishing usually involves nets). A length of fishing line is attached to a long, flexible rod or pole: one end terminates in a hook for catching the fish. A 'fishing pole' is a simple pole or stick for suspending a line (normally fastened to the tip), with a hooked lure or bait. They are most commonly made of fiberglass, carbon fiber, graphite or, classically, bamboo, and are the only fishing levers properly referred to as "poles". In contrast, 'fishing rod' refers to a more sophisticated casting tool fitted with line guides and a reel for line stowage. Fishing rods vary in action as well as length, and can be found in sizes between 24 inches and 20 feet. The longer the rod, the greater the mechanical advantage in casting.

Rods type

Carbon fibre rods

These high-tech rods are commonly used for coarse fishing in Europe, they are made using a variety of different qualities of carbon fibre. Varying in length from 3 feet through to the longest at about 18.5 feet, they allow very precise positioning of the bait, which in turn enables good catches of fish with accurate feeding, catches of carp on fisheries in the UK frequently reach 90 kg (200 pounds) in a 5 hour match, mostly made up of carp ranging in size from 250 grams (0.5 lb) to 1.3 kg (3 lb) in weight.^[1]...

Fly rods

Main article: Fly fishing

Fly rods, thin, flexible fishing rods designed to cast an artificial fly, usually consisting of a hook tied with fur, feathers, foam, or other lightweight material. More modern flies are also tied with synthetic materials. Originally made of yew, green hart, and later split bamboo (Tonkin cane), most modern fly rods are constructed from man-made composite materials, including fibreglass, carbon/graphite, or graphite/boron composites. Split bamboo rods are generally considered the most beautiful, the most "classic", and are also generally the most fragile of the styles, and they require a great deal of care to last well. Instead of a weighted lure, a fly rod uses the weight of the fly line for casting, and lightweight rods are capable of casting the very smallest and lightest fly. Typically, a monofilament segment called a "leader" is tied to the fly line on one end and the fly on the other.

Each rod is sized to the fish being sought, the wind and water conditions and also to a particular weight of line: larger and heavier line sizes will cast heavier, larger flies. Fly rods come in a wide variety of line sizes, from size #000 to #0 rods for the smallest freshwater trout and pan fish up to and including #16 rods^[2] for large saltwater game fish. Fly rods tend to have a single, large-diameter line guide (called a stripping guide), with a number of smaller looped guides (akasnake guides) spaced along the rod to help control the movement of the relatively thick fly line. To prevent interference with casting movements, most fly rods usually have little or no butt section (handle) extending below the fishing reel. However, the Spey rod, a fly rod with an elongated rear handle, is often used for fishing either large rivers for salmon andSteelhead or saltwater surf casting, using a two-handed casting technique.

Fly rods are, in modern manufacture, almost always built out of carbon graphite. The graphite fibres are laid down in increasingly sophisticated patterns to keep the rod from flattening when stressed (usually referred to as hoop strength) See St Croix ART. The rod tapers from one end to the other and the degree of taper determines how much of the rod flexes when stressed. The larger amount of the rod that flexes the 'slower' the rod. Slower rods are easier to cast, create lighter presentations but create a wider loop on the forward cast that reduces casting distance and is subject to the effects of wind. Fly Rods : Guide to Fly Rod Flex & Action. Furthermore, the process of wrapping graphite fibre sheets to build a rod creates imperfections that result in rod twist during casting. Rod twist is minimized by orienting the rod guides along the side of the rod with the most 'give'. This is done by flexing the rod and feeling for the point of most give or by using computerized rod testing (see Fly Rod Balancing ).

Spin and bait casting rods

Spin casting rods are rods designed to hold a spin casting reel, which are normally mounted above the handle (See Fishing reel). Spin casting rods also have small eyes and, not infrequently, a forefinger grip trigger. They are very similar to bait casting rods, to the point where either type of reel may be used on a particular rod. While rods were at one time offered as specific "spin casting" or "bait casting" rods, this has become uncommon, as the rod design is suited to either fishing style, and today they are generally called simply "casting rods", and are usually offered with no distinction as to which style they are best suited for in use. Casting rods are typically viewed as somewhat more powerful than their spinning rod counterparts - they can use heavier line and can handle heavier cover.

Spinning rods

Spinning rods are made from graphite or fiberglass with a cork or PVC foam handle, and tend to be between 5 and 8.5 feet (1.5 - 2.6 m) in length. Typically, spinning rods have anywhere from 5-8 large-diameter guides arranged along the underside of the rod to help control the line. The eyes decrease in size from the handle to the tip, with the one nearest the handle usually much larger than the rest to allow less friction as the coiled line comes off the reel, and to gather the very large loops of line that come off the spinning reel's spool. Unlike bait casting and spin casting reels, the spinning reel hangs beneath the rod rather than sitting on top, and is held in place with a sliding or locking reel seat. The fisherman's second and third fingers straddle the "leg" of the reel where it is attached to the reel seat on the rod, and the weight of the reel hangs beneath the rod, which makes for a more comfortable way to fish for extended periods. This also allows the rod to be held in the fisherman's dominant hand (the handle on most modern spinning reels is reversible) which greatly increases control and nuance applied to the rod itself. Spinning rods and reels are widely used in fishing for popular North American sport fish including bass, trout, pike and walleye. Popular targets for spinning in the UK and European continent are pike, perch, eel and zander (walleye). Longer spinning rods with elongated grip handles for two-handing casting are frequently employed for saltwater or steelhead and salmon fishing. Spinning rods are also widely used for trolling and still fishing with live bait.

Ultra-light rods

These rods are used to fish for smaller species, they provide more sport with larger fish, or to enable fishing with lighter line and smaller lures. Though the term is commonly used to refer to spinning or spin-cast rods and tackle, fly rods in smaller line weights (size #0 - #3) have also long been utilized for ultra-light fishing, as well as to protect the thin-diameter, lightweight end section of leader, or tippet, used in this type of angling.

Ultra-light spinning and casting rods are generally shorter (4 - 5.5 feet is common) lighter, and more limber than normal rods. Tip actions vary from slow to fast, depending upon intended use. These rods usually carry 1 to 6 pound (4.5 to 27 N) test fishing line. Some ultra-light rods are capable of casting lures as light as 1/64th of an ounce - typically small spinners, wet flies, crappie jigs, tubes, or bait such as trout worms. Originally produced to bring more excitement to the sport, ultra-light spin fishing is now widely used for crappie, trout, bass, bluegill and other types of panfish.

Sea rods

Sea rods are designed for use with huge fish from the ocean. They are long, (around 4 metres on average), extremely thick, and feature huge and heavy tips, eyes, and handles. The largest of sea rods are for use with sport fishing boats. Some of these are specialized rods, including shark rods, and marlin rods, and are for use with very heavy equipment.

Surf rods

The most common type of sea rods are for surf casting. Surf casting rods resemble oversized spinning or bait casting rods with long grip handles intended for two-handed casting techniques. Generally between 10 to 14 feet (3 – 4 m) in length, surf casting rods need to be longer in order for the user cast the lure or bait beyond the breaking surf where fish tend to congregate, and sturdy enough to cast heavy weighted lures or bait needed to hold the bottom in rough water. They are almost always used in shore fishing (sea fishing from the shoreline) from the beach, rocks or other shore feature. Some surfcasters use powerful rods to cast up to six ounces or more of lead weight, artificial lures, and/or bait over one hundred yards.

Trolling rods

Trolling is a fishing method of casting the lure or bait to the side of, or behind, a moving boat, and letting the motion of the boat pull the bait through the water. In theory, for light and medium freshwater gamefishing, any casting or spinning rod (with the possible exception of ultralight rods) can be used for trolling. In the last 30 years, most manufacturers have developed a complete line of generally long, heavily built rods sold as "Trolling Rods", and aimed generally at ocean anglers and Great Lakes salmon and steelhead fishermen. A rod effective for trolling should have relatively fast action, as a very "whippy" slow action rod is extremely frustrating to troll with, and a fast action (fairly stiff) rod is generally much easier to work with when fishing by this method. Perhaps the extreme in this philosophy was reached during the 1940s and early 1950s, when the now-defunct True Temper corporation - a maker of garden tools - marketed a line of trolling rods of 4.5 to 5 ft length made of tempered steel which were square in cross section. They acted as excellent trolling rods, though the action was much too stiff for sportsmanlike playing of fish once hooked. As Great Lakes sportfishing in particular becomes more popular with each passing year, all rod manufacturers continue to expand their lines of dedicated "trolling" rods, though as noted, for most inland lake and stream fishing, a good casting or spinning rod is perfectly adequate for trolling.

Telescopic rods

Telescopic fishing rods are designed to collapse down to a short length and open to a long rod. 20 or even 30 ft rods can close to as little as a foot and a half. This makes the rods very easy to transport to remote areas or travel on buses, compact cars, or public buses and subways. Telescopic fishing rods are made from the same materials as conventional one or two piece rods. Graphite and fibreglass or composites of these materials are designed to slip into each other so that they open and close. The eyes are generally but not always a special design to aid in making the end of each section stronger. Various grade eyes available in conventional rods are also available in telescopic fishing rods.

Care for telescopic fishing rods is much the same as other rods. The only difference being that one should not open the telescopic rod in manner that whips a closed rod into the open position rapidly. Whipping or flinging a telescopic fishing rod open may and likely will cause it to be difficult to close. When closing the rods make a slight twisting motion while pushing the sections together. Often the rods come with tip covers to protect the tip and guides.

Telescopic rods are popular among surf fishermen. Carrying around a 12 or 14 ft surf fishing rod, even in 2 pieces, is cumbersome. The shorter the sections the shorter they close, the more eyes they have, and the better the power curve is in them. More eyes means better weight and stress distribution throughout the parabolic arc. This translates to further casting, stronger fish fighting abilities, and less breaking of the rod.

Welcome to Fish Hunt

This is created by me after many year of fishing trip and experienced in deep sea fishing and hereby knew many fishing clubs,team and pictures which i can share will share with my beloved Fishing buddies in my country or overseas friend.

As for me got fish or not is not the biggest matter cause when i go fishing it will relax my brain and free from all hassle of working surround which makes me very relaxing and if my bait Hits! the thrill begins.

If every anglers mindset thinks whenever we go sea they must have good results back? They are wrong! and sometimes we must also depends on our LUCK,the right date,the weather and the right Fishing guide person(Tekong) which bring us to the right spot through their experience.